Coast High Performance PX5 Flashlight Torch 44 Lumen

    Be the first to review this product

    Coast High Performance LED flashlight products bring leading-edge technology to hand-held lighting. Using only the brightest, highest-quality LEDs and patented optical, electronic, and manufacturing systems, Coast High Performance LED flashlights offer incredible light output with the energy efficiency of LED technology.


    SKU: 10074

    Availability: Out of stock

    $25.99

    Description

    Details

    Coast High Performance LED flashlight products bring leading-edge technology to hand-held lighting. Using only the brightest, highest-quality LEDs and patented optical, electronic, and manufacturing systems, Coast High Performance LED flashlights offer incredible light output with the energy efficiency of LED technology.

    LED Lenser is the known brand within the Australian market - COAST outperform Led Lenser in all ANSI Testing - see all the info below in the techical stuff!

    The Coast PX5 Focusing LED Flashlight is a tiny powerhouse! It has a light output of 44 lumens which gives you the ability to light up much more than just keyholes and door knobs. At just 2.73 inches in length, this tiny focusable light can be carried virtually anywhere. Built tough, an impact-resistant, lightweight aluminum casing resists rust and corrosion. Tested and rated to ANSI/FL1 standards, the PX5 also features an unbreakable LED and rubberized O-ring for reliable water resistance and durability. Backed by Coast's lifetime guarantee against defects in materials and workmanship.

    Features Include:
    •44 lumen light output
    •1 hour 45 minute runtime
    •21 meter (68 ft) beam distance
    •4 X AG13 batteries (included)
    •Pure Beam™ Focusing Optic System
    •Impact and water resistant
    •1.2 ounces (including batteries)
    •2.73 inch length
    •Diameter: Body - 0.6 inches; Bezel 0.82 inches

    ANSI FL1 flashlight standards explained

    Buying a new flashlight, headlamp or lantern these days can be confusing at best. The problem is that there has not been any standardization in the reporting of performance standards of lights from the many manufacturers in the market. A variety of terms such as wattage, candlepower and lumens have been used to measure light output and the method of measuring battery run time was not standardized. This made it nearly impossible to compare features of products produced by different manufacturers. To help alleviate the confusion, a group of the leading companies in the industry joined together to create a new standard of specifications for the portable lighting industry. The resulting ANSI FL1 flashlight standards spell out very specific methods of testing for each feature under controlled laboratory conditions, and will ensure that any light produced by any manufacturer that has adopted the standards can be easily compared for performance and features. Below is a set of icons that participating manufacturers will be using on their packaging and marketing materials along with a description of each specification that each one symbolizes.

    Light output – Total light output measured in lumens. Lumens has become the most commonly used unit of measure for total light output in portable lighting devices such as flashlights, headlamps and lanterns. Wattage, on the other hand, is a measurement of power consumption, not light output. With today’s super efficient LED technology, it’s very possible to have a 1 watt LED flashlight with a greater light output than another flashlight with a higher wattage rating, particularly if the higher wattage light source is less efficient.

    Beam distance – The distance, measured in meters, at which the light projects a useful amount of light, measured at 0.25 lux. (0.25 lux is approximately the equivalent of light emitted from a full moon “on a clear night in an open field.”)

    Run time – Tested with fresh batteries from 30 seconds after the light is turned on until the light output reaches 10% of the initial measurement.

    Peak beam intensity – The brightest point in the beam measured in candela. Candela is the modern unit of measure for light intensity replacing the now-obsolete unit known as candlepower. Although candlepower was replaced by candela in 1948, it is still in common use.

    Impact resistance – The height, measured in meters, from
    which the light can be dropped onto cured concrete and still work properly. Dropped samples cannot have any visible cracks or breaks and must remain fully functional to receive this rating.

    Water resistance – This icon indicates an IPX4 rating which means the sample is tested against splashing water from all angles. If this test is performed it must be done after impact resistance testing is completed to ensure water resistance under real-life conditions.

    Water resistance – Water submersion depth rating, measured in meters. This icon indicates at least an IPX7 rating which means the sample is submerged to a minimum of 1 meter depth for 30 minutes. If this test is performed it must be done after impact resistance testing is completed to ensure water resistance under real-life conditions.

    With the adoption of these new standards, we’ll be able to more easily compare apples to apples (or flashlights to flashlights). Whether you’re looking for a light for your workshop, camping and outdoor use, emergency use, or just around the house, you’re sure to get the best flashlight, headlamp, or lantern to suit your needs by comparing lights that use the ANSI FL1 flashlight standards in their packaging and advertising

    Reviews

    Write Your Own Review

    You're reviewing: Coast High Performance PX5 Flashlight Torch 44 Lumen

    Tags

    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Video

     
     

    Size Chart